GOLDWING TOURING ASSOCIATION
OREGON STATE
GROUP RIDING POLICY
The following are suggestions only and are not to be considered rules. They are guidelines and not mandatory in order to be members of GWTA, however, the more we as a group think and ride alike, the safer and more fun the rides will be. They are the recommendations only. Riding in a group is strictly voluntary and should be done only if you feel comfortable with your motorcycle and the riding habits of your particular riding group. It is recommended that a good quality helmet, eye protection, boots, gloves and protective clothing be worn at all times, by all riding. Also, that the motorcycle be in a safe condition.
#1 and most important rule of all rides, group or single: Arrive at your destination safely.
"Group Leaders" and "Back Doors"
Responsibility of Leaders:
(a) Leadership of the group while in transit
(b) Be firm and decisive
(c) Explain routes to predetermined destination's (See Ride Organizers)
(d) If distance dictates, select some rest stops and stick to the plan (see Ride Organizers)
(e) Explain the formations to be used during transit. The staggered formation will be used for nearly all the group rides.
(f) Try to find out the riding skill level of the group members you are leading, so that you do not attempt to lead beyond their ability.
(g) Explain the two-second rule and the necessity to keep closed up.
(h) Explain the lane numbers (lane #1 is the fastest or left lane)
(i) The Group Leaders should select their own Back Doors.
(j) Maintain the integrity of the group
(k) If the Back Door advises that one of the group is having a problem and that they are leaving the group, the Group Leader should bring the group to a safe place to pull off and wait for the Back Door to report.
(l) Recognize and obey all vehicle code rules and regulations. (Watch speed limits).
(m) Slow down if necessary, when the Back Door tells you that part of the group didn't make the light, etc.
(n) Lane Changes - two (2) lane - two way traffic): If it looks like it is going to be a long drawn out process to get all of the bikes in your group around a vehicle, consider slowing down instead and keep your group intact or call for a “Round Robin. A “Round Robin” is when each bike passes, on their own, when it is safe. Once the Group leader is safely around he can advise about on coming traffic.
(o) Lane Changes (highway with at least two (2) lanes for your direction): The Group Leader will inform the Back Door of the need to move into another lane and the number of the lane to move into. At the first opportunity, the Back Door moves into the new lane, preventing any traffic from trying to pass the team in that lane. The Back Door informs the group that the lane is secure and to move one lane right or left after a vehicle that he will describe passes each rider from rear to front. The Team Leader will be last to change lanes. This method is especially effective when there is three or more lanes in the same direction.
(p) Keep in mind that the Group Leader's job is not to be a tourist, but to maintain the group in a safe manner. If you want to just enjoy the ride, don't volunteer to be the leader!
(q) If there is more than one (1) group, use group # when using the C.B. or better yet use two different channels.
(r) You and/or your co-rider should point at any hazards you may see on the road, for the bikes behind you, even if you have already said something about it on the C.B.
Back Door (Tail End Charlie, Tail Gunner, Rear Door)
(a) Probably the most misunderstood and underrated job in the group rides.
(b) The Lead Bike leads the group, but the Back Door controls the group.
(c) Responsibility:
(1) Again, the safety of the group and to maintain the integrity of the group.
(2) Be the "eyes" of the leader and the "voice" when necessary. (Example: "Rider #3, close it up please"; vehicle passing on right; etc.)
(3) Advise the Group Leader, if part of the group gets stuck by a light, another vehicle cuts into the group, etc., then also let him know when the group is back together again.
(4) Assist in most, if not all lane changes. Note: Never attempt to hold back other traffic to enable the group to change lanes...it's unsafe, not wise and illegal.
(5) To assist in lane changes at the discretion of the leader.
(6) Watch for any hazards or problems with any of the group's motorcycles.
(7) Assist any rider in the group that needs to pull over. Advise the Group Leader and pull over with the other rider.
(8) If a member of the group goes down, transmit "BIKE DOWN! BIKE DOWN!" on the C.B. and stop ASAP to help and/or direct traffic away from the accident.
(9) Make mental notes on unsafe riding practices of the group members for later discussions. Note: If any member indicates by voice or action/attitude that they don't wish to, or are unable to follow the rules of the group, the Group Leader/Back Door, has the responsibility and duty to counsel that member and if necessary, strongly suggest they remove themselves from the group while in transit. (See Pre-ride, paragraph C)
(d) The bottom line is "Safety First" and we should all assume the responsibility for the safety of fellow group members.
Defensive Riding Practices
TAKE AN MSF ERC CLASS. A FIRST AID/CPR CLASS IS RECOMMENDED.
Team Riding Techniques
Pre-ride:
(a) Always arrive on time, or earlier if possible. Think about this, someone has planned a route, the stops, everything, and here you are late, and the parking lot is empty. The ride meeting is over; you know nothing about where they were going, or what route. If you want to be included, then get there on time. Do not be a Lemming and follow a group blindly.
(b) We suggest that you always wear protective clothing and helmets.
(c) Group riding is disciplined riding and if following the rules of the group is not for you, then don't get in the group and meet everyone later at the destination. For those who do enjoy group riding, one slack rider, who does not keep the proper distance, either too close, or too far, can spoil their day. Remember the two-second rule, explained elsewhere.
(d) The size of the groups will differ due to various conditions and will be determined during the Pre-Ride meeting. The quantity of willing Group Leaders will sometimes determine the amount of groups. Ideal group size for most rides will be from three (3) bikes to six (7) bikes. The larger the group, the more care must be taken and usually, the more risk there will be.
(e) Positioning: The Ride Organizer should have all Group Leaders pull to an area where their groups will be able to form-up behind them. Riders without C.B.'s should be placed directly in front of the "Back Door", giving them more opportunity to notice the turn signals of the bikes in front of them. If you have a "preferred riding location", like being on the inside or outside of the lanes, let the Group Leader know, during the pre-ride discussions.
EXAMPLES:
(1) Six (6) bikes show up for a ride. The Ride Organizer says "OK, lets have our pre-ride meeting". He/she asks who has C.B.'s. There are four (4) bikes with C.B.'s. The Ride Organizer wants to be the Group Leader and has a C.B. (his/her number will be #1). He picks someone else, with a C.B., to be his Back Door (his/her number will be #6). The two (2) bikes without C.B.'s are placed in front of the Back Door and their numbers are 4 & 5. The other two bikes are #'s 2 & 3. The #3 bike had informed the Leader that he has a fear of heights and does not want to ride on the outside edge. That is why the Leader placed him in the #3 position. The Ride Organizer will then inform the group of the various other information needed for the ride that was discussed earlier.
(2) The Ride Organizer does not want to be the Group Leader. Then the Ride Educator, Ride Coordinator or the Chapter Director, if they are there and have C.B.'s, would take the role of Lead Bike, following the Ride Organizers directions.
(f) If you are pulling a trailer, see that section.
(g) If your gas tank is smaller than the other bikes in your group, let the Group Leader know how many miles you can go before needing to gas up.
Starting The Ride:
(a) Follow the instructions of the Group Leader. You have chosen to participate in the ride, so, when the Group Leader instructs you to line up at a certain location in preparation for departure, do it. You should have discussed any of your little quirks at the riders meeting. If you have a fear of riding in the right hand side of the lane, let him or her know, he'll place you accordingly. If you are pulling a trailer, he/she may want all the trailers together in one group, or one trailer per group.
(b) Gas and relief stops: Remember, the first rule of group riding, start with a full tank and an empty bladder. If you join the group at an intermediate stop, gas when the group gases, so that 30 minutes after the group gases up, you won't have to yell over the C.B., "I need gas".
(c) Be ready to go when the group departs. Do all the necessary things right after you stop, don't wait until the last minute. If you want to gossip with someone, go ahead and put the helmet on and gossip, but be ready to jump on that bike when the trail boss yells "Head'm up and move'm out".
(d) If you want to ride fast, leave first. If you want to ride slow, leave last.
During The Ride:
(a) Advise the leader and Back Door if you are having any kind of problem and especially if you need to leave the group for any reason. Do not pull out of the group, without warning the group!
(b) Headlights should be on low beam if you’re not in the #1 or #2 slot.
(c) Never over ride your own, or your machines ability. Remember that you are responsible for your own actions!
(d) Never be over confidant. Safety will be your primary concern for the entire ride. Remember our previous discussion of group riding. Do not let anyone else do your riding for you. Do not create an unsafe condition.
(e) The two-second rule: The leader starts out in the left track of the lane. The second bike is in the right track of the same lane, and is only one second behind the leader. Then the third rider will be in the left track of the lane, two seconds behind the leader. The fourth rider is in the right track of the lane, two seconds behind the second bike, and so on down the line. Maintaining this formation and these distances will discourage other vehicle from cutting into the group. However, if a vehicle does try to cut in between riders in the group, back off and let the vehicle in, safety of the group is the first concern.
Note: One of the reasons a group needs to ride in this close of a formation, is that when you are riding on a multi-lane highway, to keep at least one (1) motorcycle of the group in the other vehicles side view mirrors. This way the vehicle next to the group will not think that he can move into your lane, when in fact, there is another motorcycle, that is not in his mirrors, already there. This can happen when the group is spread out more than the two (2) second rule.
(f) Don’t center your focus on the bike in front of you (that's called tunnel vision). Scan instead, just like you do when riding alone.
(g) The distance between two (2) or more groups can vary depending on the type of roads, the intensity of traffic and many other factors. The groups should not ride so close to the preceding group, that in fact they become one large group. There should be enough room between groups that it is obvious to other vehicles, that they can pass a group safely.
(h) Please follow the State Law --- No alcoholic drinking before or during rides!
(i) If the group comes along a motorcyclist or anyone stranded beside the road or highway, the Group Leader should let the Back Door know so he/she can stop to see if assistance is needed. Here again, the group should find a safe place to wait for a report from the Back Door. (The universal HELP SIGN for a motorcyclist needing help is a helmet by the side of the road as you approach.)
Lane Changing and Passing Lane Changing and Passing Lane Changing and Passing
(a) Use your mirrors consistently, but never rely on them. Glance over your shoulder to confirm what you think your mirror shows you.
(b) After making your lane change, always resume the same position you occupy in the group. The same rule applies when you are passing.
(c) Car lanes on one-way, multi-lane highways are numbered from left to right. The Group Leader and the Back Door direct the team of their lane changes by referring to the lane number when lane changes are desired.
(d) When passing a vehicle on a two lane, two-way road, each team member should pass in order and in turn. The Group Leader should accelerate far enough ahead of the passed vehicle to allow room for the rest of the team to pass and the Back Door should inform the Group Leader when he's around and back in formation. Group riding can be fun. It really feels good to be a part of a group that can react as one unit when space permits, or snake around a slow moving car like a living thing. Remember that each rider is to pass at his or her own risk as traffic permits!
(e) Lane Changes (highway with at least two (2) lanes for your direction): The Group Leader will inform the Back Door of the need to move into another lane and the number of the lane to move into. At the first opportunity, the Back Door moves into the new lane, preventing any traffic from trying to pass the team in that lane. The Back Door informs the group that the lane is secure and to move one lane right or left after a vehicle that he will describe passes each rider from rear to front. The Team Leader will be last to change lanes. This method is especially effective when there is three or more lanes in the same direction.
(f) On some occasions, depending mostly on traffic, the Group Leader or the Back Door might decide it to be safer or easier to change lanes from the front “Round Robin”. If that is the case, the Group Leader will announce the decision to do this on the C.B.
(g) Wait to return to the original lane, until the Group Leader decides when it is best to do so, but never before you think it is safe!
(h) There will be times when, due to heavy traffic and/or the group waited too long to change lanes for an off-ramp, that each rider will have to move from one lane to another as an individual, not as a group member. The Group Leader should tell the group over the C.B., if possible, that the lane change has to be done "ON YOUR OWN". Be very careful, as this could be dangerous.
(i) Entering a crowded highway could also be a reason to enter "ON YOUR OWN" and the Back Door should advise the Group Leader when the group is back together again.
Twisties Twisties
(a) On mountain type roadways and on curvy roads, ride single file and each rider use the "line" that is most comfortable for him/her. Allow the bike in front of you a little more room, but remain as a group. Resume the staggered formation, when the road straightens out. Again, do not try to out ride your riding skills. If the bike in front of you is dragging his foot pegs in the curves, do so, but only if you feel confident. The bike probably just needs more air in its suspension anyway. In any group of riders there will always be a varying degree of riding skills. If you are new at group riding, ask someone who has been riding behind you, just how you have been doing. Hopefully they will give you an honest answer. Like anything else, it takes practice to watch the motorcycle in front of you, the one in front of him, and the one behind you and the one behind that one. You will soon get so that you are watching every bike, from the Group Leader to Back Door.
(b) When not familiar with the road, Slow Down. Speed is still the #1 cause for motorcycle collisions as is driver’s error.
(c) The three (3) second rule (or more) applies, even if the Group Leader forgets to mention it.
(d) If you have taken an MSF course, you should know about countersteering. That is, to initiate a right turn, push on the right grip. To turn left, push on the left grip. The key is to use countersteering, or "push steering" all the time whenever you ride.
Intersections
(a) When approaching one and if you observe a vehicle facing toward you attempting to turn left assume that driver does not see you and will turn directly into your path.
(b) When first in line at a signal-controlled intersection without a left turn arrow; don't wait at the white line. Move forward on the green signal to the approximate center of the intersection and halt with your left turn signal activated and wait until the left turn movement can safely be completed. This will allow many of the (if not the whole) group to complete a turn at the same time and is not illegal.
(c) When stopping at a traffic light or stop sign, catch up to the unit to your front and wait side-by-side. Motor on left is always first to commence moving.
(d) When entering a through street, or highway, or turning at an intersection, the Group Leader should accelerate slowly until informed, by the Back Door, that the group is together.
Stops and Final Destination
(a) Keep the same position during transit and after stopping for gas, rest stops, etc. Re-take that previous position so you are aware of the bikes around you.
(b) If the Team Leader or the Back Door approaches you at a stop or final destination remember, they have the group's best interest at heart, or better yet, our safety. Listen to what they have to say you may be in their place one day, and you'll want others to listen to you. Of course, they will be the very example of tact and diplomacy, when they critique your riding skills. But listen, it just might save your life and the lives of others.
Parking
(a) When entering parking areas, go to single file and slowly follow the leader to the designated parking area. Be alert! Don't just park anywhere! It is preferable to back into your spot, side by side. If the leader does not feel that there is enough room for all bikes, he will then tell you to find your own spot. Do so carefully, especially on dirt. Watch out for cars backing up. Remember that most of our bikes are quiet. Try to keep the group together in an orderly fashion. Remember that this is disciplined riding. It really looks good when a neat formation of motorcycles comes down the highway exits in an orderly fashion and parks all in a row. Spectators stop and watch an orderly group enter a parking lot, close up and park all in a row and you can see the admiration on their faces. It makes you proud to be a part of that group of motorcyclists.
(b) If (Heaven Forbid) you lose control of your motorcycle while halted and it begins to fall over, don't attempt to hold it up when it goes past center. It's better to hurt your machine than yourself. The Co-Rider should keep their feet in while the bike is falling and not try to step off, which would take away any chance for the rider to save it.
Ride Organizers (for each specific ride)
Ideas and locations for rides come from you, the Chapter Member. Everyone has a favorite ride. Share it! Remember that the Ride Organizers do not have to be a Group Leader on their ride. Our chapter has a ride meeting during the month of February, to schedule most of the activities and prepare a ride calendar.
There could be multiple groups, Group Leaders and Back Doors, but only one Ride Organizer per ride.
(a) The Ride Organizers route the rides.
(b) When necessary, they will make maps and alternate routes.
Note: Alternate Route: This takes a little more work for you, but gives several rewards. You can have a quick, straight route for those that just want to get from point to point. You can have a scenic, challenging route for those who enjoy the challenge offered and for those who like to take their time and enjoy the scenery. Were the routes checked shortly before the event so that construction, washouts, or other unplanned obstacles could be avoided?
(c) When reservations to restaurants, lodging, etc., are necessary, the Ride Organizers make sure these are completed.
(d) The Ride Organizers will usually go out with group #1, (unless they are pulling a trailer), to be sure all is in order at the destination in question. If some bikes are pulling trailers, it is suggested that they be in the last group.
(e) Unless the ride is a "Mystery Ride", every rider should be told the destination.
(f) The Group Leaders are only an extension of the Ride Organizers.
(g) Be sure to tell the time the meeting will take place, as well as the time of departure.
Chapter Ride Coordinators
(a) Along with the Chapter Rider Education Directors, observe and oversee the Group Leaders, Back Doors and all of the groups in general.
(b) Aid's the Ride Organizers whenever possible.
(c) Compiles the Chapter Ride Calendar.
Trailers
(a) If there are more bikes pulling trailers than there are groups, the trailers should form their own group. They should anyway, if there are at least three (3) bikes pulling trailers and at least three (3) bikes that are not.
(b) It is the Group Leaders option to have a bike pulling a trailer as his Back Door, assuming that he also has a C.B.
(c) Remember that bikes pulling trailers take the curves and turns differently than bikes that are not pulling trailers. The same is true when it comes to braking.
(d) Also, it is illegal, in most states, for any vehicle pulling a trailer, to ride in any lane other than the right hand lanes of two (2) lane or greater highways, except to pass another vehicle.
Comments
All of these guidelines are meant to make your ride more pleasant and safer. Any time we put more than one motorcycle in close proximity to another, we have just increased the risk factor. We live in a very structured society. Rules should not be anything new to any of us. They make moving the herd just a little easier. If it takes your co-rider, or your rider a little longer to get his/her stuff together all in one bag, edge him or her on with a gentle nudge "get your helmet on and lets get ready to go". There are other phrases that can be more explicit, but do so at your own risk. After all of this, it does not mean that you cannot participate in Chapter rides if you do not like group riding. Leave ahead of the group and do your own thing, start after the group has left and sight see to your hearts content. You know the destination; you know the speed that your co-rider likes best. Do it the way you will enjoy it the most.
C.B. Chatter
(1) Don't interfere with information being passed on between the Group Leader and Back Door.
(2) If you wish to converse with a fellow rider, call that rider or co-rider by name, i.e. "Hey Harry, this is Jack" or whatever his handle might be.
(3) Limiting the use of the C.B. for idle chatter is particularly critical during departures and arrivals. There is a tendency for riders to be tense during the takeoffs and somewhat lax during arrivals. Experience has shown that these are the times that unfortunate incidents tend to occur. Be Alert!
(4) C.B. Etiquette:
Motorcycle C.B.'s are notoriously under powered. If you can "reach out" for a mile you are really lucky. The C.B. has become an inter-bike method of communication. They really work well for short distance talking. However anyone with a decent mobile radio will "walk all over you" if they are close by. A base station will "blow your windows out", even if you don't have any windows. Around town they can become a real nuisance what with big base stations blasting away with their silly little bells and whistles.
But, for good to excellent communication while driving down the highway, they can't be beat. Works better than hand signals. The dealer-installed models, fit right in that little nook or cranny, and integrate right along with the radio, tape player and intercom.
Of course you need speakers in your helmets and the little bitty microphone. J&M Corporation makes some really great systems to fit in any helmet, full face or open face, and even the little shorties. Again, it’s your choice.
To Transmit: First key the mike. But wait just a second or two for the radio to come up to power. It's not like a telephone with a two-way conversation. They call the C.B. a two-way radio, but it only works one way at a time. So, key the mike, pause, now in a normal tone, or better yet, lower (deepen) your voice just a hair, and talk plainly. Enunciation is the key to good clear radio speech. (Just like the man on the five o'clock news). Speak slowly and plainly, try to use simple terms that are easily understood. Remember there's wind noise to contend with, especially with open face helmets. Mama just may be talking at the same time, and you know your priority. Hold the key for just a second when you are finished, then release it. Don't try to "quick key", or key just as soon as someone else lets off his or her key. Allow a little time in between transmissions. When two people are conversing, don't try to jump in with some smart comment, most of the time you will "double" with them and nobody understands anybody.
Try talking to the bike right ahead of you and then the farthest bike away. You may be surprised to find out that the guy who is the farthest away hears you the best.
The microphone in a full-face helmet is usually the best; after all, you don't have the wind noise quite as much as with an open face helmet. But, you may have already invested a couple of hundred dollars in your helmet, so you just might have to make do. Something to consider at the next helmet purchase.
Don't try to talk over a real powerful station that is talking at the same time. It just does not work. Physics and all that stuff. One problem is called skip or DX in radio lingo; these are really powerful stations transmitting hundreds of miles. To cut them out, just turn up your squelch, that's the other knob on your radio. Some times you hear DX, some times you don't. It has to do with sunspots and weather conditions. The squelch control cuts out all of the low powered noise.
Normally, in a group ride there are times like first starting out and coming to rest at a gas or food break, we give up the C.B. to the Group Leader and his Back Door. It's just a matter of safety. After all, we are coming to a stop and we can take the helmet off and talk like real people.
Embarrassing Moments: Remember, if your co-rider is talking to you on the intercom and either of you press the transmit buttons, everyone in the group will hear what is being said. That could be a big oops!